Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the way to go if you want an adjustable front beam.
This is the way to go if you want an adjustable front beam. These adjusters take the place of the stock anchor in the middle of each one of the front tubes. They need to be welded in. This should be done by a qualified welder (who hopefully has done it before). We suggest you buy two, because lessening the tension on one bar puts a larger load on the other bar.
Bug (Type 1): -65
Ghia: -65
Race/Off-Road: -65
No customer reviews for the moment.
Part #: 131711741A
Heater Control Knob, Red
Application:Part #: 151883407
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 111101481
This gasket goes between the valve cover and the head.
Application:Part #: 215703706A
These large panels box in the frame on buses with sunroofs or door on both sides.
Application:Part #: 113941531E
This switch turns on the headlights, as well as, dims the dash lights.
Application:Part #: 141871327
Rear Window Seal Kit (Convertible only)
Application:Part #: 261863012
These are the interior panels.
Application:Part #: 6415061B
It's super compact, light weight and easy to mount on Buggies or Sand rails.
Application:Part #: 117867535
Springs for Sunroof Cars to Clear Sunroof (Set of 4)
Application:Part #: 113129034KIT
This adapter is used when you want to put a 30PICT carb on a dual port manifold. Will only work with a round bowl style carb. It will NOT work with a square bowl carb.
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: 1105401AC
These connecting rods are longer than stock.
Application:Part #: 251721555G
This cable operates the carburetor(s).
Application:Part #: 113853322AGR
The front door window rolls up and down between these two rubber seals.
Application:Part #: 113198026
This kit contains a bushing, a clutch return spring and the retaining clips to install the throw-out bearing shaft in the transmission.
Application:Part #: 211798001A
Accelerator Pedal Repair Kit
Application:
This is the way to go if you want an adjustable front beam.
