Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
High performance street cars or off road cars have been known to crack stock transmission cases.
High performance street cars or off road cars have been known to crack stock transmission cases. This Rhino case is just like the stock case but it has added webbing which gives it more strength. You will need someone who has knowledge of VW transmissions to put your parts into this case.
Bug (Type 1): 61-72
Bus (Type 2): 60-67
Type 3: -72
Ghia: 61-72
Race/Off-Road: All
No customer reviews for the moment.
Part #: 001301083B
This seal keeps the fluid in the converter.
Application:Part #: 111301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 113713145A
The points that are in the shifter that disengage the transmission..
Application:Part #: 1311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 001301209
Nose Cone Bushing, Front, Late
Application:Part #: 211301205H
This is the front of the transmission that houses the shift lever.
Application:Part #: 111301289B
This boot goes around the nose cone to seal up the hole where it comes through the pan.
Application:Part #: 1301050
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 1301185
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 311301265A
These rubber mounts hold the transmission in place.
Application:Part #: 6501141
These retainers help stiffen the plates that bolts the tubes to the trans.
Application:Part #: 1517120
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:Part #: 113301263C
These rubber mounts hold the transmission in place.
Application:Part #: 1301265L
Urethane Front Transmission mount with Hardware
Application:Part #: 1301150
Bolt on Center Transmission mount, Urethane stops included
Application:
High performance street cars or off road cars have been known to crack stock transmission cases.
