Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
Bug (Type 1): 1600
Bus (Type 2): 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 111953041A
This is the whole unit, lens and bulb holder.
Application:Part #: 111863107
Rubber Firewall Mat, Black
Application:Part #: 028129087A
The heater hose goes from the fan shroud to the heater boxes.
Application:Part #: 211425021ABR
This little shock goes from the center pin arm or pitman arm to the front axle beam or frame.
Application:Part #: APWGKEYCHAIN
Wolfgang International Keychain Bug or Bus
Application:Part #: 151871041C
This boot keeps the wind from ripping up your top when it is down.
Application:Part #: 141945227C
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 111827301
Engine Deck Lid Hinge
Application:Part #: 1945245
These were popular back in the 50's.
Application:Part #: 6B03010WH
These boots are made to keep water and dirt out of distributor and coil.
Application:Part #: 181405361A
These joints are located in the ends of the control arms.
Application:Part #: 131405667
Spindle Nut, Right
Application:Part #: 1101030
Included in this kit are the bolts, nuts and washers required for "out to head" assembly of the engine..
Application:Part #: 112863403
These carpet kits are to be used with the original rubber floor mats.
Application:Part #: 113955425
This is a screw on wiper blade for bug up to 1957. It does NOT come with the arm like the factory blades did. So you will have to buy part number 113955407A and 113955408A. We can NO longer get the factory style blades that came with the arm. Blades are sold each
Application:Bug (Type 1); -57
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
