Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The rear wheel attaches to the rear brake drum.
The rear wheel attaches to the rear brake drum. Make sure you torque the axle nut to 250 ft. lb., we don't want any wheels falling off. We suggest you drive the Bug for a day and tighten the nut again. For some reason the nut seems to loosen up the first time. Always use a cotter pin to lock the nut. If the hole doesn't line up, tighten it a little bit more until it does. Never, ever back the nut off to line up the hole.
No customer reviews for the moment.
Part #: 211609209
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 113609205A
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 131609209
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 211611483
This valve in the wheel cylinder allows you to bleed the brakes.
Application:Part #: 113698261A
This kit is for rebuilding the wheel cylinder.
Application:Part #: 113611053B
This hydraulic slave cylinder is found in the rear brake backing plate.
Application:Part #: 113698003
This kit has all the springs, pins and keepers for drum brakes.
Application:Part #: 113609537C
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 113609439E
Brake Backing Plate, Left Rear
Application:Part #: 113609440E
Brake Backing Plate, Right Rear
Application:Part #: 211831421A
These pins are in the door hinges.
Application:Part #: 111105227
Retaining Clip, 1200-1600cc
Application:Part #: N113121
Some of the more common nuts you might need..
Application:Part #: 113953513A
Turn Signal Switch, six wire design
Application:Part #: 211941323
This is the replacement lens and seal for the backup lights.
Application:Part #: N137761
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 6703113B
The offset hole location of the padding allows it to be positioned to provide more protection where you want it.
Application:Part #: 111863122
These are the interior panels.
Application:Part #: 021256251A
Gasket
Application:Part #: 1903108RD
EMPI Serpentine Belt System Red
Application:Part #: 111711629B
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: 113611015BD
This hydraulic cylinder feeds all the wheel cylinders.
Application:Part #: 211837455
Door Window Division Bar Securing Clip
Application:Part #: ZVW14SS
Threshold Plates (fit in door jam next to running boards)
Application:Part #: 113798078
This is the pin and the spring needed on the accelerator pedal.
Application:Part #: 111809939C
This is the cable that opens the gas door..
Application:
The rear wheel attaches to the rear brake drum.
