Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Polished Billet Alternator/Generator Pulley Kit
Polished Billet Alternator/Generator Pulley Kit (Must Use Billet Shims, Stock Shims will not fit)
Bug (Type 1): 1300-1600
Bus (Type 2): 1300-1600
Type 3: 1300-1600
Ghia: 1300-1600
Thing: 1300-1600
No customer reviews for the moment.
Part #: 141953162C
These are the lenses that go over the front turn signal bulb holders.
Application:Part #: 311945191
This seal goes between the tail light housing and the body of the car..
Application:Part #: 111711115A
This boot goes around the gear shift lever at the base keeping dirt out of the moving parts.
Application:Part #: N122311
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 6201553
Remote Filler Neck, 3 Piece Set
Application:Part #: 251807124A
these plastic caps mount on the ends of the later year bumpers..
Application:Part #: 111837235IV
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 131119358
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
Application:Part #: 111298007
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1129511
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1115141
This oil pump cover comes with a threaded boss.
Application:Part #: JC22330
Jaycee Fuel Pump Block off w/ 3/8" Breather, Red
Application:Part #: N144832
Some of the most common studs you might need.
Application:Part #: 1109032
Engle Cams TCS-30 (Turbo Applications only)
Application:
Polished Billet Alternator/Generator Pulley Kit