Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
A stock sump plate that has been chromed..
A stock sump plate that has been chromed.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 113115181A
This is the plate on the bottom of the motor.
Application:Part #: 1117109B
Billett Oil Cooler Block Off
Application:Part #: 1117022
Mesa coolers are the state of the art oil coolers.
Application:Part #: 111115495
This is more of a bolt than a nut.
Application:Part #: 111115450
Vapor Baffle 25-36 HP
Application:Part #: 1117103ALM
These fittings are used for the stainless steel hose.
Application:Part #: 111117151
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115611
Chrome dipsticks come in different lengths and styles..
Application:Part #: 1115105E
Oil Pick Up Tube Cut To Length
Application:Part #: 1115449BL
Replacement Oil Cap Billet Blue
Application:Part #: 113115475
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 111115475A
Oil Filler Seal, 25-36 HP
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:Part #: 1117106
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117023
Mesa coolers are the state of the art oil coolers.
Application:Part #: JC21040
Jaycee Mag-Plate, 6 Bolt, Silver
Application:
A stock sump plate that has been chromed..