Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Front Wheel Bearing Nut, Front Right
Front Wheel Bearing Nut, Front Right
No customer reviews for the moment.
Part #: 151801131B
These are the replacement rails for convertibles.
Application:Part #: N124241
Foot Pedal Snap Ring holds pedal shaft to Pedals
Application:Part #: 068115561B
Oil Filter use in place of HP1
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 021119957
Oil Pressure switch boot
Application:Part #: 1129511B
Kadron Carburetor Linkage Ball Socket Ends, 10/32 Left & Right, Pair
Application:Part #: 1115422
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 311115107HD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 141837256A
Karmann Ghia Pins, Rollers, & Clips for Door Checkrod Kit for Both Doors
Application:Part #: 1905115
This chrome cover and bracket goes over a coil to dress it up.
Application:Part #: 111801201AD
Rear Crossmember Left
Application:Part #: 2117004
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 071101061D
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 211405521B
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam.
Application:Part #: 113819719A
These are the vents that clip into the dash.
Application:Part #: 211863011
These are the interior panels.
Application: