Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Inner Rear Wheel Bearing CHINA
Inner Rear Wheel Bearing CHINA
No customer reviews for the moment.
Part #: 1615107F
Replacement Front Brake Bracket for Kit # 1615100F, Pair
Application:Part #: 6115468
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 111945095N
This assembly comes with the bulb holder and lens.
Application:Part #: 211809585C
Rocker Panel, Lower Left
Application:Part #: 211707197A
Bumper End Unit Seals
Application:Part #: 211703116
This is where you would put in the stock jack to jack up the bus.
Application:Part #: 1105259
This is a chrome stock bolt and washer that holds the crankshaft pulley on.
Application:Part #: NGK D7EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: 113863012
These are the interior panels.
Application:Part #: 111863711
This is a full carpet kit.
Application:Part #: 261827505
Engine Lid Lock Mechanism, mounts inside of engine lid
Application:Part #: 443253115B
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 211813175A
Rear Apron, With Crank Hole for Starter Handle
Application:Part #: 213707356A
Rear Bumper Overrider, Right
Application:Part #: 111903221S
Replacement Bearings for Serpentine System
Application: