Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Accelerator Lever Spring, (2 required)
Accelerator Lever Spring, (2 required) secures push rod to accelerator lever
Bus (Type 2): 1955-72
No customer reviews for the moment.
Part #: 111801046D
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 211703125
This support goes from the main frame out to the inner rocker.
Application:Part #: 3129510A
1 3/4" EPC/ICT Type 3 and 4 Hexrod Assembly Linkage
Application:Part #: 3251004
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1127468B
Weld-in Male Bung fitting, 6AN
Application:Part #: 113611724B
These are the metal brake lines found throughout the car.
Application:Part #: 111115107BHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 111115131A
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1129616
This air cleaner is a sealed unit; the top and bottom do not come off, but they're washable.
Application:Part #: 155871401
This is what holds the top closed.
Application:Part #: T1105253
This is a light duty puller for removing the crank shaft pulley..
Application:Part #: EFH930
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 111937505F
This is a replacement fuse box.
Application:Part #: 143845121CCL
This seal goes around the front window. Fits sedan and convertables.
Application:Part #: 113101353BRB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: 1105401PL5
Pauter Rods 5.500 Light weight set of 4 These are custom order Connecting rods we will need to know your Length, Pin size, and Journal size prior to ordering.
Application: