Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Header Only, 1 1/2" tubing
Header Only, 1 1/2" tubing
Bus (Type 2): 72-74
No customer reviews for the moment.
Part #: 411823665
This the cable you pull to release the front hood.
Application:Part #: 311501325
Axle Bearing Cap Bolt (Set of 4)
Application:Part #: JC44480
Jaycee Billet IDA Stacks, Silver, Each
Application:Part #: 151871045C
This boot keeps the wind from ripping up your top when it is down.
Application:Part #: 211841081G
Cargo Door Skin, Lower Front to Waistline
Application:Part #: 111863410
This carpets the area behind the rear seat.
Application:Part #: 113711333BBK
This is the button that you push to release the brake.
Application:Part #: 111943023B
This housing mounts on the deck lid to hold the light assembly for the license plate.
Application:Part #: 1401022
If the front end of your car sits further down then the rear end, caster shims will help by pushing out the bottom of the beam.
Application:Part #: 211611070CCH
Front Right Wheel Cylinder (2 Required) CHINA
Application:Part #: 2251011
SS Phat Boy Muffler
Application:Part #: 111105713A
Rod Bearings .20
Application:Part #: 133957809A
This cable goes from the speedo to the driver side front wheel.
Application:Part #: 211857527A
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:Part #: 6823566
If you don't like the hood hold downs, you can use hood pins.
Application:Part #: 1823022
This is a dress-up kit for the front and rear air intakes on your bug..
Application:
Header Only, 1 1/2" tubing
