Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Plastic Replacement Wire Cover Replaces stock Fiberboard
Plastic Replacement Wire Cover Replaces stock Fiberboard
Ghia: 1956-74
No customer reviews for the moment.
Part #: 211881897A
Front Passenger Seat Rubber Stop, 1 per bus
Application:Part #: 111881364
This is the padding that sits on top of the springs of the seat.
Application:Part #: 251845121AM
This seal goes around the front window.
Application:Part #: 251953513
This switch tells the flasher which way to send the current.
Application:Part #: 113101353ECO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1821306AAL
These were originally sold as an accessory by the dealer.
Application:Part #: 113141701F
This shaft holds the throw-out bearing in place.
Application:Part #: 211261235A
The heater hose goes from the fan shroud to the heater boxes.
Application:Part #: 1129602
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 113881213
These bushings on the seat track keep the seats from rocking and rolling.To install, remove your seat and clip the new bushings on.
Application:Part #: 1119526CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 113819723
Defrost Hose
Application:Part #: 1707135BCH
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 022101361C
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1615101B
This kit allows you to bolt disc brakes onto your Bug king and link pin or ball joint front end.
Application:Part #: 1141031
These clutch disc do not slip.
Application:
Plastic Replacement Wire Cover Replaces stock Fiberboard
