Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Rack and Pinion Unit, 2 mounting holes, 11 5/8", 36 Spline Shaft, 1.5 turns lock to lock
Rack and Pinion Unit, 2 mounting holes, 11 5/8", 36 Spline Shaft, 1.5 turns lock to lock
Offroad/Race: All
No customer reviews for the moment.
Part #: 211805031J
Front Nose Panel, complete with lower portion of winshield surround
Application:Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1109607
CB Performance 46mm SS Intake Valves each
Application:Part #: 143847319
Quarter Window Hinge Set, 6 plastic Pieces
Application:Part #: 251407625
Front Wheel bearing
Application:Part #: 211801574A
Engine Compartment Gusset, Inner, Right
Application:Part #: 311115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 261827579
Engine Lid Key Cover Seal
Application:Part #: 211837571A
Window Lift Channel, fits both sides
Application:Part #: 211611711B
Brake Line Master Cylinder to "T" Front
Application:Part #: 211251051E
This is the exhaust silencer.
Application:Part #: 1109460
These shims are used under the rockers to set the geometry.
Application:Part #: 113953193
This seals the front turn signal housing from the fender.
Application:Part #: 6945201
These lights work well on off road cars.
Application:Part #: 1903109BOBL
Billet Pulley Outer Half Blue
Application:Part #: 6501263
These stub axles will convert your CV joints to Bus or 930 joints.
Application:
Rack and Pinion Unit, 2 mounting holes, 11 5/8", 36 Spline Shaft, 1.5 turns lock to lock