Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Ball Joint Bolt-On Front Disc Brake kit, Dual Drilled Discs with 5x130 and 5x4.75" patterns
Ball Joint Bolt-On Front Disc Brake kit, Dual Drilled Discs with 5x130 and 5x4.75" patterns. Will only work with Stock Drum Spindles.
Bug (Type 1): 66-77
Ghia: 66
Offroad: 66-77
No customer reviews for the moment.
Part #: 1405075
Replacement Brake Rotor Double Drilled 5x130mm and 5x4.75"
Application:Part #: 311615107BR
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle.
Application:Part #: 6615104E
Front Rotor for Disc brake setup, Dual Bolt Pattern, 5x130/5x4.75", Ball Joint Front End
Application:Part #: 1698152N
Premium Brake Pads for Caliper # 311615107BR
Application:Part #: 1698152A
Replacement pads for 3116151070BR
Application:Part #: 1615107H
Replacement Front Brake Bracket for Kit # 1615100STK, 6615101, Each
Application:Part #: 113881177
Camber Detent Springs, Pair
Application:Part #: 211885805
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 1127112ALM
Bulkhead Union Fitting, Straight -6AN
Application:Part #: 113847133A
These seals are for the side popout windows.
Application:Part #: 113127521A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1511227
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: 1115109
This oil thermostat goes in line on your external oil cooler system.
Application:Part #: 261813164A
This is what the battery sits on.
Application:Part #: N0111633
Some of the more common nuts you might need..
Application:Part #: VDO150855
These are the most common sending units.
Application:Part #: 311501283
If a rear axle bearing is bad, you will have excessive play in the rear wheel.
Application:Part #: 1101157
This cam plug is made out of billet alluminum and has an o-ring on it.
Application:Part #: 1117101
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 141898035
The striker is what keeps the door closed, an absolute necessary part to say the least.
Application:Part #: 6501281
Billet Aluminum Bearing Cap, Each
Application:Part #: 022109612D
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application: