Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Center Defrost Cable, Controls dash defrost operation
Center Defrost Cable, Controls dash defrost operation
Bus (Type 2): 73-75
No customer reviews for the moment.
Part #: T1501331
If you plan to take off your CV joints you will need this socket.
Application:Part #: 1119317CH
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 141707181
Front/Rear Bumper Overrider Base Seal
Application:Part #: 113847131BBK
This is the welt that goes around the rear popout windows.
Application:Part #: N144003
Some of the most common studs you might need.
Application:Part #: 1601060APL
Empi 5-Rib 5x205, 5.5"x15"
Application:Part #: 111945525
Brake Light Switch Wiring Plug, 2 wire
Application:Part #: 1105253RD
This is a crank pulley for an upright motor.
Application:Part #: 6801112
These tabs are used for mounting just about anything to tubing..
Application:Part #: 1198026A
This kit contains a quality urethane bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 311813133
Inside Engine Lid Seal
Application:Part #: 113101353ERB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: 211703501B
Emergency Brake Cable Tube 1535mm
Application:Part #: 6601041
Offroad Wheel, 15"x6.5", 5x205 bolt pattern
Application:Part #: VDO360001
These are the most common sending units.
Application:Part #: 1883403CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:
Center Defrost Cable, Controls dash defrost operation