Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the button that you push to release the brake.
This is the button that you push to release the brake. To remove the old one, just unthread it.
Bug (Type 1): All
Bus (Type 2): -67
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 211405692B
Bearing Grease Cap, Right Side
Application:Part #: 141707137D
Front Bumper Bracket Seal Left
Application:KG; 72-74
Part #: 1117107
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1127104ALM
This is stainless steel braided fuel line.
Application:Part #: 111821707BGB
This is the beading that goes between the fender and the body.
Application:Part #: 1127111ALM
AN Adapter No. 6- 1/4 NPT
Application:Part #: 211809190
Louver Repair Section fits both sides
Application:Part #: 1105401PL5
Pauter Rods 5.500 Light weight set of 4 These are custom order Connecting rods we will need to know your Length, Pin size, and Journal size prior to ordering.
Application:Part #: 186360211
These ride on the tunnel from the shifter forward.
Application:Part #: 113501535A
This bolt holds the rear suspension control arm to the car.
Application:Part #: 141863705
This is a full carpet kit.
Application:Part #: 1101469
If you have high compression you will need to vent the valve covers into a breather box. Deluxe Vents have barbed end for the hose connection.
Application:Part #: 111701061Q
This is one entire half of the pan.
Application:Part #: 1601102A
Chrome Steel 60 Degree on the base of the lug nuts 14mm, Set of 4
Application:Part #: 113101211G
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 1251163
These fit all stock mufflers and come in three different styles..
Application:
This is the button that you push to release the brake.