Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Rear Rotor for Disc brake setup, Dual Pattern 5/130mm and 5/4.75", Short Spline
Rear Rotor for Disc brake setup, Dual Pattern 5/130mm and 5/4.75", Short Spline
Bug (Type 1): Aftermarket Wheels
Bus (Type 2): Aftermarket Wheels
Type 3): Aftermarket Wheels
Ghia: Aftermarket Wheels
Thing: Aftermarket Wheels
Offroad/Race: Aftermarket Wheels
No customer reviews for the moment.
Part #: 1109406
These shims are used with the Solid Shaft Rocker Kit.
Application:Part #: 311198169B92
Piston Ring Set 92mm
Application:Part #: 111405627
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: 1129518
These Stainless Steel Linkage Arms will not Flex or Bend under the most demanding circumstances.
Application:Part #: 1601104C
Long Wheel Studs, M14-1.5 on both ends, Set of 5
Application:Part #: 311721361
This tube goes from the metal tube coming out of the tunnel to the bracket on the transmission.
Application:Part #: 111885591
Rear seat securing bolt (2 required)
Application:Part #: 1615100
This kit allows you to bolt disc brakes onto your Bug king and link pin or ball joint front end.
Application:Part #: 6415063
It's super compact, light weight and easy to mount on Buggies or Sand rails.
Application:Part #: 265867515A
Roof Lining, Grey, Double Cab
Application:Part #: NGK D8EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: 211611301CM
The reservoir holds the brake fluid for the brake master cylinder.
Application:Part #: 111721231B
Brake Pedal Stop Plate
Application:Part #: 261829575
These rubber buffers go on the gates and body of single and double cab Buses to prevent the gates from banging into the body.
Application:
Rear Rotor for Disc brake setup, Dual Pattern 5/130mm and 5/4.75", Short Spline
