Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Left Rear Caliper 5/205 with Emergency Brake, Swing Axle
Left Rear Caliper 5/205 with Emergency Brake, Swing Axle
Bug (Type 1): -68
Type 3: -67
Ghia: -68
Offroad/Race: -68
No customer reviews for the moment.
Part #: 211201125D
Fuel Tank Filler Hose, Curved
Application:Part #: 113819515
Foam Seal Pair for Fresh Air Box Flap
Application:Part #: 111012525BK
If you don't have a cigarette lighter, you will need to drill a hole in the dash.
Application:Part #: 1117698
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 113721001
Pedal Assembly Bushing Kit
Application:Part #: 151883406
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 211798002
Bumper Bolt Kit
Application:Part #: 1127101S
This is stainless steel braided fuel line.
Application:Part #: 151837628A
For convertibles, this is the upper pin that the vent wing pivots on.
Application:Part #: ECX25B
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 113129901
This is the tube that goes through the fan shroud that the accelerator cable threads through.
Application:Part #: 311198573RK
This kit comes with the gaskets, the needle and seat, and accelerator pump diaphragm for the carburetor..
Application:Part #: 2498211A
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. These spindles will give you the stock ride and give you that lowered stance. They are sold on an exchange basis and come with new king pins. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as...
Application:Part #: 1251009CC
EMPI Ceramic Coated PHAT Boy Muffler
Application:Part #: 021251235
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 111827517A
This is the seal that goes under the deck lid handle..
Application:
Left Rear Caliper 5/205 with Emergency Brake, Swing Axle
