Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Right Rear Caliper, 4x130, with Emergency Brake, Swing Axle
Right Rear Caliper, 4x130, with Emergency Brake, Swing Axle
Bug (Type 1): -68
Ghia: -68
Offroad/Race: -68
No customer reviews for the moment.
Part #: 113611021CGR
Brake Master Cylinder
Application:Part #: 143863011
These are the interior panels.
Application:Part #: AL25X
Alternator For Diesel Applications
Application:Part #: 211251051B
This is the exhaust silencer.
Application:Part #: 251407629
This is the seal for the front wheels.
Application:Part #: 141831402C
Karmann Ghia Right Upper Door Hinge
Application:Part #: 6801234
Billet Bracket for 3/16" Brake Line, for 1 1/4" Tubing
Application:Part #: 1601102A
Chrome Steel 60 Degree on the base of the lug nuts 14mm, Set of 4
Application:Part #: 1611701A
These stainless steel braided flex lines don't swell like the original rubber hoses and they make the undercarriage look a lot nicer.
Application:Part #: 111721507F
This is the pedal that works the throttle.
Application:Part #: 211405641D
These are the inner bearing seals on the drums or rotors.
Application:Part #: 021256091M
These are your source of heat.
Application:Part #: 1101476BWG
Wolfgang Billet Valve Covers There are a few companys making billet valve covers and I have used a few of them and liked them. But we decided to make our own with a few differences.
Application:Part #: 311133241
Intake manifold Boot Sleeves Set of 4
Application:Part #: 113953051K
Turn Signal Bulb Holder, Each
Application:
Right Rear Caliper, 4x130, with Emergency Brake, Swing Axle