Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These flywheels have been reconditioned and are sold on an exchange basis.
These flywheels have been reconditioned and are sold on an exchange basis. If your flywheel has a groove where the clutch rides, it's a good idea to replace it. Read CRANKSHAFT ENDPLAY SHIMS for important instructions on flywheel installation.
Bug (Type 1): 67-79
Bus (Type 2): 67-71
Type 3: 63-73
Ghia: 67-74
Race/Off-Road: 67-79
No customer reviews for the moment.
Part #: 1105401A
These connecting rods are longer than stock.
Application:Part #: 1903108BLK
EMPI Serpentine Belt System Black
Application:Part #: 1105169
These cranks are made from stock German core cranks.
Application:Part #: 1105253RD
This is a crank pulley for an upright motor.
Application:Part #: 113105101A10
These are used cranks with reground rod and main journals.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 113105251G
This pulley on the end of the crank turns the fan belt.
Application:Part #: 111105245
This seal goes behind the flywheel.
Application:Part #: JC86040
Jaycee Billet 7" Crank Pulley for Street Cars, Red
Application:Part #: 111105719A
Rod Bearings .30
Application:Part #: 1105401AC
These connecting rods are longer than stock.
Application:Part #: 111105713A
Rod Bearings .20
Application:Part #: 111105213
This key goes into the crank to align the steel cam gear with the brass distributor drive gear.
Application:Part #: 1105219
This spacer goes between the steel cam gear and the brass distributor gear on the crank.
Application:Part #: 111105433
Wrist Pin Bushing.
Application:Bug (Type 1); 40hp
Bus (Type 2); 40hp
KG; 40hp
Part #: 1105271
If your are going to run a 69mm or a 78 mm counterweighted crank, then you will want to have your flywheel 8 doweled or get a flywheel has been 8 doweled.
Application:
These flywheels have been reconditioned and are sold on an exchange basis.
