Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This kit extends the shock towers of your king and link pin front end, giving you more travel.
This kit extends the shock towers of your king and link pin front end, giving you more travel. Take your time setting this kit up. We suggest you tack weld it on, set the arms and shocks up and make sure everything lines up beforen welding it up solid. It's a good idea to buy the shock extensions for the lower arm as well as the towers. The shocks you'll use are part number 2513001.
Race/Off-Road: -65
No customer reviews for the moment.
Part #: 1129601
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1411300C
These heavy duty sway bars help eliminate swaying.
Application:Part #: 1501602
We make wheel adapters for some of the more common drums and wheels.
Application:Part #: 111919051
Fuel Tank Sending Unit
Application:Part #: 221847673A
This is the seal that goes around the vent wing seal that is in the middle or the rear side of your bus.
Application:Part #: 113847135
These seals are for the side popout windows.
Application:Part #: 211129493
Steel Vacuum Line junction between Vacuum Advance and carburetor
Application:Part #: N0123191
Circlip IRS Rear inner Wheel Bearing Housing (1 per side) 2 per car
Application:Part #: 211945363A
This is the lens that you see on the side of the bus in the front and the rear.
Application:Part #: 211259371
Vent Dash Levers
Application:Part #: 111198551
This kit allows you to rebuild your fuel pump.
Application:Part #: 133807225
This is the strip of rubber that goes on the center of the bumper..
Application:Part #: 1115351OR
O-Ring Kit for Spin on Filter (System One)
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 131201127
This is a rubber flap that folds out protecting the side of the car when filling it with gas.
Application:
This kit extends the shock towers of your king and link pin front end, giving you more travel.