Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:These are the front door handles.
These are the front door handles. They come with keys. To get your old one off peel back the rubber around the door latch and you should see a phillips head screw(s). Remove the screw(s) and push the handle back towards the front of the car and it will fall off. On buses 1964-1967 you will need to pull off the door panel and use an allen wrench to remove the handle.
Bus (Type 2): 69-79
Ghia: 69-74
Thing: 73-74
No customer reviews for the moment.
Part #: 111845101H
These are cut from safety glass as required by law.
Application:Part #: 1109641
If you are going to run dual springs we suggest you use these valve spring retainers as well.
Application:Part #: 1127101ALF
This is stainless steel braided fuel line.
Application:Part #: 113255737
Pre-Heat Tube Clip, 2 Required
Application:Part #: 151883406
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 1117021
Mesa coolers are the state of the art oil coolers.
Application:Part #: 113713145A
The points that are in the shifter that disengage the transmission..
Application:Part #: 241853341
Angled Window Molding Clip
Application:Part #: 151871351
These strips screw to the top.
Application:Part #: 113707201B
This is the strip of rubber that goes on the center of the bumper..
Application:Part #: 2311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 211255705
Main Heater Tube Insulation Strap Kit
Application:Part #: 6611796
A two pound residual pressure valve is recommended for disc brake applications while a 10 pound valve is mostly used on drum brake applications..
Application:Part #: 2601029C7
BRM Wheel, Chrome, 5x112, 7x17"
Application:Part #: 151837572D
Front Window Sash, Right, Convertible Only
Application:Part #: 1115465
This air filter is made to protect the crankcase.
Application: