Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Oil Relief Valve Spring 25-36 HP
Oil Relief Valve Spring 25-36 HP
Bug (Type 1): 25-36 HP
No customer reviews for the moment.
Part #: 111198455
Main Bearings, 25-36 HP
Application:Part #: 6601035POL
Bead Lock Ring, No Hardware, Polished
Application:Part #: 211837253
Front Door Check Rod Pin
Application:Part #: 251419803
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 113853555SL
Running Board Molding, Stainless
Application:Part #: 153871373A
This is a sleeve that goes in the front window frame for the guide pins to sit in.
Application:Part #: NGK B6HS
When replacing these use anti-seize on the threads. NGK B6HS is direct swap for this Bosch W7AC Plug
Application:Part #: 211945237K
This assembly comes with the bulb holder and lens.
Application:Part #: 1615104
Front Disc Brake Kit, Ball Joint, Double drilled 5x130 w/14x1.5mm threads or 5x4.75" with 12mm threads
Application:Part #: 241857613AWW
Assist Strap, does not include Coat Hooks as shown
Application:Part #: 113885583
These are the parts needed to hold the back of the rear seat up.
Application:Part #: 6903137
This pulley is a lot smaller than a stock pulley.
Application:Part #: 1821305A
These were originally sold as an accessory by the dealer.
Application:Part #: 111821707BGB
This is the beading that goes between the fender and the body.
Application:Part #: 111837421
Clip, holds rear metal felt run channel in place (2 required per car)
Application:
Oil Relief Valve Spring 25-36 HP
