Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Steering Wheel To Steering Shaft Retaining Nut
Steering Wheel To Steering Shaft Retaining Nut
Bug(Type 1): 74-79
Bus (Type 2): 67, 74-79
Race/Offroad: 74-79
No customer reviews for the moment.
Part #: 111955641
Wiper Assembly to Cowl Grommet
Application:Part #: 211415669G
Replacement Gray Horn Button
Application:Part #: 029105245B
This seal goes behind the flywheel.
Application:Part #: T1501331
If you plan to take off your CV joints you will need this socket.
Application:Part #: JC22920
Jaycee Billet Bus Spring Plate Retainers, Pair, Red
Application:Part #: 113853535B
This is the chrome trim that went on the front and sides of the Bug to dress it up.
Application:Part #: 1881407CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 113415061E
If you have a lot of play in the steering don't just assume the steering box is bad.
Application:Part #: 211201075M
Fuel Tank. This tank can be used with non fuel injected busses, you just need to plug the injection return line.
Application:Part #: 311823703A
This is the seal that goes around the rear deck lid.
Application:Part #: 1511228
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: 311115329B
This is the rubber sleeve that connects the oil filler to the motor.
Application:Part #: 6721555
If you feel you need to shorten your throttle cable, you can cut it and add this piece to get you to the correct length.
Application:Part #: 025109337
Collapsible Push Rod Tube
Application:Part #: 1105169F
Forged 69mm Counter Weighted Crankshaft
Application:Part #: 211837253
Front Door Check Rod Pin
Application:
Steering Wheel To Steering Shaft Retaining Nut