Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This tin goes behind the crank pulley.
This tin goes behind the crank pulley. It is the earlier, short, style. Makes sure it matches the larger pulley tin. The fit is poor.
No customer reviews for the moment.
Part #: 1119025BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119027CH
This small fan shroud came on the 36hp motor.
Application:Part #: 1117323
Hoover Bit
Application:Bug (Type 1); 1600
Bus (Type 2); 1600
KG; 1600
Thing; 1600
Offroad/race car; 1600
Part #: 1119027BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119525CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 1119025CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 111119571
In the stock front pulley tin, there is a hole for the 1" hose coming down from the stock air cleaner.
Application:Part #: 043119350B
Heater Channel Tin Upper Right
Application:Part #: 1119527CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119023
This spacer kit uses 1 1/4" thick aluminum spacers to close the gap between the fan shroud and the cylinder tins where the sheet metal screw attaches.
Application:Part #: 131119358
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
Application:Part #: 311119317A
These are also known as the "forget-me-nots".
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 1119516BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:
This tin goes behind the crank pulley.
