Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Exhaust Valve Guide +.002"
Exhaust Valve Guide +.002"
Bus (Type 2): 72-79
Vanagon: 80-91
No customer reviews for the moment.
Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 1863111CU
Custom door panels are a great way to customize the interior of your Bug.
Application:Part #: 111721555A
This cable operates the carburetor(s).
Application:Part #: 113945191
This seal goes between the tail light housing and the body of the car..
Application:Part #: 111198157A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 6119025CH
This screen attaches to the fan shroud keeping the big stuff out.
Application:Part #: 113501615DGR
The rear wheel attaches to the rear brake drum.
Application:Part #: 111115475A
Oil Filler Seal, 25-36 HP
Application:Part #: 1601063CH
Empi 4 Spoke, Chrome, 4x130, 15x5.5"
Application:Part #: 113953021F
Semiphore, 12 Volts, New, Each
Application:Part #: 1117109
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
Application:Part #: 1883408CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 1827026
These are the aluminum trim pieces that go over the deck lid louvers..
Application:Part #: 311721335A
This cable pulls the arm that releases the clutch.
Application:Part #: 211801052HL
This area tends to rust.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:
Exhaust Valve Guide +.002"
