Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Oil Strainer Cover Nut
Oil Strainer Cover Nut
Bus (Type 2): 72-79
Vanagon: 80-83
No customer reviews for the moment.
Part #: 211813355I
This is a repair panel for the rear corner.
Application:Part #: 113127307A
This rod drives the fuel pump.
Application:Part #: 021119356C
Lower Heater Channel Tin, Right Side
Application:Part #: 1845131AL
Bug Safari Frame to Body Seal This is the Lip Seal Style Seal that goes on the outer edge of your Safari Frame and mates to the Body of the vehicle
Application:Part #: N124241
Foot Pedal Snap Ring holds pedal shaft to Pedals
Application:Part #: 111823507A
The hood latch keeps the hood from flying open.
Application:Part #: 111711141IV
This is the knob on top of the shifter..
Application:Part #: 111801045L
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 1611701B
These stainless steel braided flex lines don't swell like the original rubber hoses and they make the undercarriage look a lot nicer.
Application:Part #: 141707251A
These are miscellaneous seals that fit bumpers, For more seals related to bumpers see Bumper Gromments..
Application:Part #: 6401234
These go from the front beam to the belly pan to strengthen the front beam area.
Application:Part #: 1837581BIL
Billet Window Crank Set
Application:Part #: 1711105BK
Tall trigger reverse lock out shifter.
Application:Part #: 1129614F
This fitting can be used when routing your breather hose into your air cleaner.
Application:Part #: 111837639B
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 2601029C7
BRM Wheel, Chrome, 5x112, 7x17"
Application:
Oil Strainer Cover Nut
