Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is what gets smashed up first in an accident.
This is what gets smashed up first in an accident. For Buses and Bugs up to 1967, American style bumpers have tubing on the top that tie into the bumper guards. The 1967 and earlier Euro blades have no holes for tubing. Bumpers for Bugs 1968 and later are blade style only.
Bug (Type 1): -67
No customer reviews for the moment.
Part #: 111707199A
These round grommets go into the body for the over rider bracket..
Application:Part #: 113707191B
This special chrome bolt has a round head on it.
Application:Part #: 111707336B
These brackets hold the bumpers on.
Application:Part #: 113827903
This bracket holds the license plate to the car.
Application:Part #: 111707121
These are the brackets that hold the bumpers on.
Application:Part #: 111707197A
These grommets go on the fenders or the body where the bumper brackets go through..
Application:Part #: 113707155B
These are the guards on the front and rear bumpers.
Application:Part #: 1707155
These are the guards on the front and rear bumpers.
Application:Part #: 1707199
When you take the front and rear bumper assemblies off to install Euro blade bumpers and guards, you're left with holes in the front and rear aprons.
Application:Part #: 113707391
This tubular bracket goes on American style bumpers to support the upper tubing of the bumper..
Application:Part #: 113707391WW
Bumper Support
Application:Part #: 113798054R
Stainless Steel Rear Bumper Overrider Set
Application:Part #: 1707134R
If you have a 1968 through 1973 bug and want the eariler style bumpers on it, these are the brackets that will get you there..
Application:Part #: 113827903
This bracket holds the license plate to the car.
Application:Part #: 415707401
This is the strip of rubber that goes on the center of the bumper..
Application:Part #: 113707156
Chrome Bumper Guards with Impact Strip
Application:Part #: 113798053A
This is what gets smashed up first in an accident.
Application:Part #: 1707135ACH
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 1707199
When you take the front and rear bumper assemblies off to install Euro blade bumpers and guards, you're left with holes in the front and rear aprons.
Application:Part #: 113707386W
Rear Bumper Bow, Right, US Style
Application:Part #: 111707135A
These brackets hold the bumpers on.
Application:Part #: 113707156A
Chrome Bumper Guards without Impact Strip
Application:Part #: 1707155
These are the guards on the front and rear bumpers.
Application:Part #: 1707135BCH
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 113707201B
This is the strip of rubber that goes on the center of the bumper..
Application:Part #: 133807305A
This is what gets smashed up first in an accident.
Application:Part #: 111809635
Rear Bumper Mount
Application:Part #: 1707305
Chrome Tube Nerf Bar
Application:
This is what gets smashed up first in an accident.
