Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Jaycee Billet 6" Crank Pulley for Offroad Cars, Blue
Jaycee Billet 6" Crank Pulley for Offroad Cars, Blue
Uses Common 10 x 877 Belt
Offroad/Race: All
No customer reviews for the moment.
Part #: 113109021DBR
We've had no luck with regrinds, therefore we sell only new camshafts.
Application:Part #: 251723555
This cable operates the carburetor(s).
Application:Part #: 1827151
These brackets, that the hinges mount to in the engine compartment area, are a nice way to dress it up..
Application:Part #: 1301051
High performance street cars or off road cars have been known to crack stock transmission cases.
Application:Part #: 131141719HDL
Clutch Cable Arm Forged for 16mm Cross shaft
Application:Part #: 1837225
These window cranks and door handles are a nice way to give the interior of your car a sporty look.
Application:Part #: 211703491A
Rear valance inner support
Application:Part #: 211611701
This flex hose goes from the metal brake line to the front wheel cylinder.
Application:Part #: N113672X
License Lens Screw
Application:Part #: 1117109
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
Application:Part #: T1101022
If you're planning on building more than one engine, this heavy duty stand is the way to go.
Application:Part #: 6201552
This cover bolts onto the body of the car allowing you to cover up something, usually the gas filler.
Application:Part #: 1301266
Trans Axle Adapter Kit
Application:Part #: 6115467E
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 113955544IV
Radio Knobs, Ivory, Set of 2
Application:
Jaycee Billet 6" Crank Pulley for Offroad Cars, Blue