Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Jaycee Leak proof Pushrod Tubes, Blue
Jaycee Leak proof Pushrod Tubes, Blue
Bug (Type 1): All
Bus (Type 2): -1971
Type 3: 68-73
Ghia: -74
Thing: All
Offroad/Race: All
No customer reviews for the moment.
Part #: 2129701
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 211615301A
This is the front brake rotor that the pads ride against on the disc brake front ends.
Application:Part #: 111251165B
Muffler Tail Pipe
Application:Part #: N141251
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 175867199
Arm rest Expanding Nut
Application:Part #: 211255463
Fuel Filler Hose, Hose Clamp
Application:Part #: 311941177
This chrome metal ring goes around the headlight.
Application:Part #: 1101157
This cam plug is made out of billet alluminum and has an o-ring on it.
Application:Part #: 221847219
This triangular plate is welded to your bus to allow you to screw in your pop-out window latch.
Application:Part #: 211698001F
Metal Brake Line kit
Application:Part #: 111837257
These are the pins that go into rod that stops to prevent you from opening the doors too far.
Application:Part #: 111823509B
The hood catch is what the pin of the hood latch goes into.
Application:Part #: 1109310
These lifters are made by Engle and have a small hole in the end of them that allows oil to be pumped onto the cam lobe and lifter face.
Application:Part #: 211837015F
Door lock mechanism.
Application:Part #: 111819189B
Heater Vent, Plastic, LH
Application:Part #: 1601123
These are studs and nuts for different types of wheels.
Application:
Jaycee Leak proof Pushrod Tubes, Blue