Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:These are a sealed unit.
These are a sealed unit. Changing the headlight bulb on Bugs up to 1966 and Buses up to 1967 isn't much fun because you'll have to take the bucket out and remove the clips to replace it. On Bugs and Buses 1968-1979, it's much easier. Remove the headlight ring and take out the three small Phillips screws holding the headlight to the bucket.
Bug (Type 1): -66
Bus (Type 2): -66
Type 3: -66
Ghia: -66
Off-Road: -66
No customer reviews for the moment.
Part #: 1903532
This is just a cover that fits around a 30amp generator to give it that chrome look.
Application:Part #: 111105213
This key goes into the crank to align the steel cam gear with the brass distributor drive gear.
Application:Part #: 1
**CALL TO ORDER** We are authorized TMI distributors!
Application:Part #: 361827527
Rear Hatch Button Seal
Application:Part #: 113853555C
These are the correct trim moldings for your running boards.
Application:Part #: 111101123
These pins position the main bearings in the case halves so you can line up the oil galley holes with the main bearings.
Application:Part #: 1198160
These rings are cast iron.
Application:Part #: 171711166
This bushing wraps around the front shift rod.
Application:Part #: 111903137D
This is the belt that turns the generator.
Application:Part #: 1501243
These spacers go on the axles and are much stronger than the stock spacers.
Application:Part #: 111711687
Clip Kit, Secures Choke and Fuel Reserve cable to Chassis
Application:Part #: 111953675
SHO and SWF Brand Semaphore Power Wire Screw
Application:Part #: 111711115
Shifter Boot, Accordian Style
Application:Part #: 1857207BK
These panels go in the dash so you can install gauges.
Application:Part #: 311949101A
Amber Side Markers Euro Style
Application:Part #: 211498101A
The main reason to replace these clamps is because you've destroyed the old ones getting them off.
Application: