Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are studs and nuts for different types of wheels.
These are studs and nuts for different types of wheels. When using screw in studs, use loctite on the threads that go into the drum and a spot of grease or anti sqeeze on the nut threads. We have seen alot of times when the studs screw into far and wipe out your brakes.
Bug (Type 1): -67
Bus (Type 2): 55-67 With wheel adapters
Type 3: 62-65
Ghia: 55-65
Race/Off-Road: -67
No customer reviews for the moment.
Part #: 2711101PL
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Application:Part #: 221847219
This triangular plate is welded to your bus to allow you to screw in your pop-out window latch.
Application:Part #: 1101393
Whether your motor lives or not can depend upon this little shim.
Application:Part #: N113672
These are the screws that hold on the door panels.
Application:Part #: 113837640AHD
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 225877321
These are all of the parts that we can get our hands on for metal sunroof bugs.
Application:Part #: 113853615
These are three little plastic pieces that push into the front hood to hold the emblem in place.
Application:Part #: 1119028CH
This small fan shroud came on the 36hp motor.
Application:Part #: 6115468E
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 1129611EL
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: VDO310039
These are VDO's most popular gauges and the ones that made VDO famous.
Application:Part #: 1413004
KYB's are the best selling monotube replacement shock in the U.S.A..
Application:Part #: 1707135APL
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 1119516CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 211501283
If a rear axle bearing is bad, you will have excessive play in the rear wheel.
Application:Part #: 1141701A
This heavy duty arm is a good idea if you need a new clutch arm.
Application:
These are studs and nuts for different types of wheels.
