Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Left rear bumper shock
These are what attaches the bumper to the body. They are a shock of sorts and really never go bad unless the car gets hit.
No customer reviews for the moment.
Part #: JC86200
Jaycee Billet 5.5" Crank Pulley for Drag Cars, Red
Application:Part #: 113955541BBK
Wiper Switch Knob, includes Center Button
Application:Part #: 211943121C
This is the lens and seal for the light that shines on the license plate.
Application:Part #: 1129510
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 113501615JGR
The rear wheel attaches to the rear brake drum.
Application:Part #: 6857050B
This panel goes across the whole dash.
Application:Part #: 043251051C
This is the exhaust silencer.
Application:Part #: JC22550
Jaycee Billet Bug Spring Plate Retainers, Pair, Blue
Application:Part #: W8CC
When replacing these use anti-seize on the threads.
Application:Part #: 113845521CL
This seal is for the rear window.
Application:Part #: 1070276K
Stainless Steel Bug (Type 1) Roof Rack (Knockdown Style)
Application:Part #: 113863707
This is a full carpet kit.
Application:Part #: 021101361K
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 021298051A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1105256BK
Standard Size Pulley w/ Bolt On Sand Seal Kit
Application:
Left rear bumper shock