Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
10mmx100mmx1.50 thread
This stud is used on the lower part of and engine case when using an upright engine with a IRS bus transmission in an off road car. It is long enough to go from the engine through the bus transmission then through the steel mount. Sold in pairs.
No customer reviews for the moment.
Part #: 151863378
These rear kick panels go between the rear seat frame and floor.
Application:Part #: 111881795A
Seat Paperboard Backing, Set of 2
Application:Part #: 261829577
These rubber buffers go on the gates and body of single and double cab Buses to prevent the gates from banging into the body.
Application:Part #: 111821021D
These new front fenders are not as thick as the original German fenders.
Application:Part #: 111821509MEX
The running boards go between the fenders on each side of the car.
Application:Part #: 113819449
Pair of Quarter Vent Grilles, Chrome
Application:Part #: 111711749A
Heater Lever Bushing Kit, Set of 4
Application:Part #: 151867507
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 1601029BK
BRM Wheel, 5x205, 5" wide, Black
Application:Part #: 1883408CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 151845521ECL
This seal is for the rear window. This is for a CONVERTIBLE ONLY.
Application:Part #: 311301265A
These rubber mounts hold the transmission in place.
Application:Part #: 113251163D
Tail pipes route the exhaust out of the back of the stock muffler..
Application:Part #: 111809091
Rear Wheel Well
Application:Part #: 113899115A
This is a little square pad that goes on the torsion housing where the body mounts.
Application:Part #: 112863401
These carpet kits are to be used with the original rubber floor mats.
Application:
10mmx100mmx1.50 thread
