Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Hose Clamp for 5mm hose
This is a much better clamp then a std worm drive clamp. The problem with the worm drive style clamp is the worm teeth dig into the hose. This style clamp will not do that.
No customer reviews for the moment.
Part #: VCP12
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 61316
These stock pumps pump fuel into the carburetor.
Application:Part #: 043133241
These two boots connect the intake manifold with the end casting on a stock dual port 1600cc engine.
Application:Part #: 1129601HD6
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1127109ALM
This is stainless steel braided fuel line.
Application:Part #: 1127101S
This is stainless steel braided fuel line.
Application:Part #: 1127101ALM
This is stainless steel braided fuel line.
Application:Part #: 111198551
This kit allows you to rebuild your fuel pump.
Application:Part #: 1129605EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1129607
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1129701W
EMPI Deluxe Dual HPMX or IDF Manifold kit
Application:Part #: 113127313
These stock pumps pump fuel into the carburetor.
Application:Part #: 311133263
Fuel injection seal large
Application:Part #: 1127101
Hose Clamp For 7mm Hose
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 1129611EL
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:
Hose Clamp for 5mm hose