Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
To check yours remove the front wheels.
To check yours remove the front wheels. Grab the A arm and pull it back and forth. If the arm moves they are bad. Now these bushings are pressed in on the a arms. If you don't have a press it will be difficult to install these. After you install the uppers the front end will need to be aligned.
Bug (Type 1): Super Beetle only 71-79
No customer reviews for the moment.
Part #: T1401027
This is a great way to tow your car.
Application:Part #: 2080123
This overhead fiberglass gauge housing is designed to fit all busses 1955-1967.
Application:Part #: 1109618
Dual Spring Shims, .015" 8 piece
Application:Part #: 111955408B
The arms extend from the shaft to hold the wiper blades, very rarely do they fail..
Application:Part #: 04016
These are the parts found in the distributor.
Application:Part #: 141957397
Speedometer Bulb Socket, Black Plastic 1.2 watt
Application:Part #: 211845231
This seal fits in a C channel in the front door frame of buses up to 1967.
Application:Part #: 111971237A
This is a strap that goes between the front transmission mount and the body.
Application:Part #: 151863708
This is a full carpet kit.
Application:Part #: 6517283
These conversion flanges will allow you to run bigger stronger Bus or 930 CV joints..
Application:Part #: 111511245E
This rubber "donut" goes around the spring plate, allowing it to move up and down.
Application:Part #: 113412329B
SB Strut Upper Mount w/ Bearing
Application:Part #: 1115449BK
Replacement Oil Cap Billet Black
Application:Part #: 1601127
"Tuner Style" Chrome Lug Bolts 1/2" x 20mm, Set of 5 w/ Tool
Application:Part #: 1117699
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:
To check yours remove the front wheels.
