Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Chromoly Seat Belt Tab, radiused for 1 1/2" tubing
Chromoly Seat Belt Tab, radiused for 1 1/2" tubing, makes mounting suspension
Offroad/Race: All
No customer reviews for the moment.
Part #: 211957801E
This cable goes from the speedo to the driver side front wheel.
Application:Part #: 251813133B
Inside Engine Door Seal GERMAN
Application:Part #: 211721555N
This cable operates the carburetor(s).
Application:Part #: 311405625B
These bearings go in the drum or rotor hub to allow them to spin. German
Application:Part #: 113853325C
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 211837219R
Key Blank, R Profile
Application:Part #: 113129034KIT
This adapter is used when you want to put a 30PICT carb on a dual port manifold. Will only work with a round bowl style carb. It will NOT work with a square bowl carb.
Application:Part #: 1129513
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 112950501IDA
48 IDA Air Fuel Mixture Screw and Spring
Application:Part #: 113919049DGR
Gas Tank Sending Unit
Application:Part #: 211405533
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam.
Application:Part #: 113405312D
These are the front spindles that your brake discs mount to.
Application:Part #: 113857611EBK
This is a strap, not a handle.
Application:Part #: 111837421
Clip, holds rear metal felt run channel in place (2 required per car)
Application:Part #: 211401273
These are the rubber snubbers that are in between the front torsion bar arms.
Application:Part #: 1101394
Whether your motor lives or not can depend upon this little shim.
Application:
Chromoly Seat Belt Tab, radiused for 1 1/2" tubing