Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These new front fenders are not as thick as the original German fenders.
These new front fenders are not as thick as the original German fenders. On Bugs up to 1957, you will need to weld the bullet front turn signal bases from your old fenders to the new ones. The fenders will ship freight and are usually damaged in transit.
Bug (Type 1): 68-73
No customer reviews for the moment.
Part #: 111801046K
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 111805591C
This is the front skin on the Bug.
Application:Part #: 111809086CD
Quarter Panel, Rear Portion w/ Bumper Retainer, Right
Application:Part #: 111809201BX
Front Portion, Side Panel
Application:Part #: 111898051
Fender Hardware Kit
Application:Part #: 133821021
These new front fenders are not as thick as the original German fenders.
Application:Part #: 133809021BX
Front Wheel House, Lower Rear Section
Application:Part #: 111805352E
Front Hinge Pillar. Right
Application:Bug (Type 1): 62-79
Offroad: 62-79
Part #: 111809085CB
Fastening Panel, Rear Fender
Application:Part #: 111801041CX
Inner Rocker Panel Left
Application:Part #: 133821306A
These are new rear fenders.
Application:Part #: 151701061B
Floor Plate, Left, Convertible only
Application:Part #: 111701061MHD
This is one entire half of the pan.
Application:Part #: 111701062N
Right hand Floor Plan for Type 1 1971-72
Application:Part #: 111813301F
The rear apron is the panel between the rear fenders.
Application:Part #: 151801132B
These are the replacement rails for convertibles.
Application:
These new front fenders are not as thick as the original German fenders.