Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is the front skin on the Bug.
This is the front skin on the Bug. It needs to be welded in place. On Bugs up to 1967, they came with the bumper holes in the apron. When replacing the apron, we suggest you drill out as many of the spot welds as possible to make the job easier.
Bug (Type 1): 68-
No customer reviews for the moment.
Part #: 111701062N
Right hand Floor Plan for Type 1 1971-72
Application:Part #: 111805351A
Front Hinge Pillar, 2 hinge Screws
Application:Part #: 111809201BX
Front Portion, Side Panel
Application:Part #: 111801172C
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 111809085CA
Lower Quarter Repair Panel, Left, 10" High
Application:Part #: 1701061
These pans will replace those rusted out parts of the front or rear floors.
Application:Part #: 113821021P
These new front fenders are not as thick as the original German fenders.
Application:Part #: 111809201AX
Front Portion, Side Panel
Application:Part #: 152701062N
Floor Plate, Right, Convertible
Application:Part #: 111857233A
Radio Block off Plate, without chrome strip and clips
Application:Part #: 111821021D
These new front fenders are not as thick as the original German fenders.
Application:Part #: 111813155
Metal Channel for Engine to Body Seal
Application:Part #: 1701060
Metal Battery Tray
Application:Part #: 111701061N
Left hand Floor Plan for Type 1 1971-72
Application:Part #: 111809085B
Rear Bumper Mount, Left
Application:Part #: 111813301J
The rear apron is the panel between the rear fenders.
Application: