Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is what everyone cut out in the 60's.
This is what everyone cut out in the 60's. They will require some welding to put back.
Bus (Type 2): 71-79
No customer reviews for the moment.
Part #: 211813355I
This is a repair panel for the rear corner.
Application:Part #: 261813164
This is what the battery sits on.
Application:Part #: 211703651
Rear Apron Mount Bracket, Left
Application:Part #: 211813227B
This is a repair panel for the area above the engine lid.
Application:Part #: 211703071B
Front End Support Kit (3 Pcs) Inner Structure
Application:Part #: 211809252
B Post Repair Section, Outer, Right, 200mm (7.9") high
Application:Part #: 261809041C
Left Side Panel No Storage Compartment
Application:Part #: 211817518
Gutter above Front Right Door
Application:Part #: 211813355GWW
Rear Lower Corner, Left, from bottom to beltline
Application:Part #: 211809187
Side Strengthening Panel 1.9 meters long (74.8")
Application:Part #: 211841091A
Cargo Door Skin, Lower Rear to Waistline
Application:Part #: 211703622
This is where you would put in the stock jack to jack up the bus.
Application:Part #: 265809167A
Crew Cab Rocker Panel up to Beltline, Left Side, 840mm tall
Application:Part #: 211703621
This is where you would put in the stock jack to jack up the bus.
Application:Part #: 211809311
Upright Repair Section, Lower 300mm tall (11.81")
Application:
This is what everyone cut out in the 60's.
