Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Front Roof Repair Section
Front Roof Repair Section
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: 111707121
These are the brackets that hold the bumpers on.
Application:Part #: 113405615DGR
These are the front drums that the brake shoes ride on.
Application:Part #: 111405647CH
Outer Front Wheel Bearing (Chinese)
Application:Part #: N103483
This is a list of the most common bolts used on a car..
Application:Part #: 1251262C
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 211405661
Front End Thrust Washer
Application:Part #: 151863010
These are the interior panels.
Application:Part #: 1115611
Chrome dipsticks come in different lengths and styles..
Application:Part #: 1301150
Bolt on Center Transmission mount, Urethane stops included
Application:Part #: 175947561
Door Contact Switch, fits either door
Application:Part #: N114071
Fender Weld Nuts, 8mm, 10 pieces
Application:Part #: 113109623C
These springs return the valves back to their seats.
Application:Part #: 0280160200
Fuel Pressure Regulator for later air cooled Bugs and Buses
Application:Part #: 1109398
These rocker studs are much stronger than the stock studs and are .100" longer to allow more flexibility when setting your rocker arm geometry..
Application:Part #: 6115349
If you built your motor out of a type 3 case, you probably notice that once you got it all together you're missing a dipstick tube.
Application: