Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This mount is used with the stock steering box.
This mount is used with the stock steering box. It makes the stock steering box look better.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 131415802E
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 6415811C
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 7/8"-14 LH
Application:Part #: 1415801N
Narrowed Tie Rods for Link Pin
Application:Part #: 113415835
These are the ball joints on the tie rods.
Application:Part #: 131415821A
These are the ball joints on the tie rods.
Application:Part #: 141564614
This steering wheel is a very cheap steering wheel in comparison to the Leccara wheels.
Application:Part #: 1415668
This steering wheel is a very cheap steering wheel in comparison to the Leccara wheels.
Application:Part #: 1415801AN
Narrowed Tie Rods For Ball Joint Front Beam
Application:Part #: 311415535
This is a plug that goes into the end of the steering shaft for the horn wire.
Application:Part #: 113415813
These are the ball joints on the tie rods.
Application:Part #: 6415066
Rack and Pinion Unit, 2 mounting holes, 11 5/8", 36 Spline Shaft, 1.5 turns lock to lock
Application:Part #: 6415048B
This takes a turn and half out of your steering wheel.
Application:Part #: 131415813E
These are the ball joints on the tie rods.
Application:Part #: 14156631A
3 Hole to 5 Hole Steering Wheel Adapter
Application:Part #: 6415050
This shaft is for the steering on tube style cars.
Application:Part #: 6415048A
This takes a turn and half out of your steering wheel.
Application:
This mount is used with the stock steering box.