Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This hydraulic cylinder feeds all the wheel cylinders.
This hydraulic cylinder feeds all the wheel cylinders. After installing a new one make sure the rod that pushes the plunger is adjusted correctly. When adjusting it you can't see the measurement but you can feel it. The rod should have about an 1/8" of free play before it starts pushing. If it's too tight it will not allow the fluid to travel back to the reservoir locking up the brakes usually in the middle of an intersection.
No customer reviews for the moment.
Part #: 113698002A
Brake Spring Kit
Application:Part #: 113611301H
Brake Fluid Reservoir, 1967 Only
Application:Part #: 113721207A
Brake Pedal to Master Cylinder Pushrod
Application:Part #: 133698002
This kit has all the springs, pins and keepers for drum brakes.
Application:Part #: 113611399
Brake Fluid Reservoir Pad
Application:Part #: 113611723A
These are the metal brake lines found throughout the car.
Application:Part #: 113405615DGR
These are the front drums that the brake shoes ride on.
Application:Part #: 113609237H
These four shoes or linings are in the front drums and are sold on an exchange basis.
Application:Part #: 113611829A
Master Cylinder to Bulkhead Spacer
Application: