Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This seal fits in a C channel in the front door frame of buses up to 1967.
This seal fits in a C channel in the front door frame of buses up to 1967. We suggest you glue this seal in with 3M super weather strip adhesive.
Bus (Type 2): 50-67
No customer reviews for the moment.
Part #: 221809179
New replacement pop out window frame hinge
Application:Part #: 241845621
They seals go around the small windows on the roof of 21 and 23 window buses up to 1967.
Application:Part #: 211837621
Vent Wing Gutter Left
Application:Bus (Type 2); 55-67
Part #: 211837605
Vent Window Assembly, Left
Application:Part #: 831837565
This rubber piece holds the front door window in it's sash.
Application:Part #: 211837375A
The front door windows slide in the felt channels.
Application:Part #: 211837605D
Complete Vent Window Assembly, Left
Application:Part #: 211837606D
Complete Vent Window Assembly, Right
Application:Part #: 241853305
Window Aluminum Trim, Front Windshield, both halves
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:Part #: 265845321
Double Cab Rear side Stationary window Seal w/Vent Wing Window
Application:Part #: 111837439DGR
This is the channel that the front door windows roll up into.
Application:Part #: N136612
Vent Window Pivot Rivet, Secures Vent Window To Upper Bracket
Application:Part #: 111837421
Clip, holds rear metal felt run channel in place (2 required per car)
Application:Part #: 113853329
Outside Scraper Clip
Application:Part #: 211837625
Vent wing seals on the front doors keep out the elements.
Application:
This seal fits in a C channel in the front door frame of buses up to 1967.