Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This seal goes around the front window.
This seal goes around the front window. To remove the old glass, use a fixed-bladed knife. Stick the knife between the rubber and glass on the outside of the Bug. Now cut the rubber until you feel the point of the knife hit metal. Cut all the way around, until you have cut the rubber in half. Peel the rubber off and slowly push the glass out from the inside. Make sure someone is on the outside to catch the windshield. Install the new rubber with the seam on the top and in the middle. Do not use any kind of lubricant, as it will cause the glass to separate. Wrap a piece of 14 gauge wire in the groove that holds the window to the Bug, overlapping the ends on the bottom at the center. Clean the body area and do any repairs needed. We use dish soap as a lubricant, but only between the rubber and body metal, never between the rubber and the glass. Smear the soap from the lip to the outside edge. At this point, grab a friend to help you. Place the window in the Bug from the outside with the two ends of the wire inside the Bug. Push the window in until the rubber hits the lip. While your friend holds the glass in place from the outside, get into the Bug and pull one end of the wire a little one way and then the other wire a little the other way. Keep doing this until you reach the top. If you miss, push the window out and start over. After the first one youll be surprised how easy it is. If you have a lot of windows to do we offer a tool that makes it even easier. American style has groove for chrome.
Ghia: 67-69
No customer reviews for the moment.
Part #: 143847327
Front Upright Quarter Window Seals, Pair
Application:Part #: 143845211A
These seals slide into a channel sealing the front door window glass on a Ghia.
Application:Part #: 143845211C
These seals slide into a channel sealing the front door window glass on a Ghia.
Application:Part #: 143845211BL
These seals slide into a channel sealing the front door window glass on a Ghia.
Application:Part #: 143847348
Top Quarter Window Post Seals (Pair)
Application:Part #: 143845521CAM
This seal is for the rear window.
Application:Part #: 143845121CCL
This seal goes around the front window. Fits sedan and convertables.
Application:Part #: 143847341B
Door Window To Quarter Pillar Upright Seal (Pair)
Application:Part #: 143847319
Quarter Window Hinge Set, 6 plastic Pieces
Application:Part #: 143853367
Bottom Quarter Window post Seals (Pair)
Application:Part #: 143845321B
Pop-Out Quarter Window Seals (Pair)
Application:Part #: 143845321A
Non Pop-Out Quarter Window Seals
Application:Part #: 143845211
These seals slide into a channel sealing the front door window glass on a Ghia.
Application:Part #: 141837475C
Outside Scraper, Rubber Only
Application:Part #: 143845521AAM
Rear Window Seal With Chrome Molding Groove
Application:KG; 56-66
Part #: 143845212BR
These seals slide into a channel sealing the front door window glass on a Ghia.
Application: