Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Rear Window Seal With Chrome Molding Groove
KG; 56-66
This is the rear window seal that has a groove in it that takes the "C" style chrome molding.
No customer reviews for the moment.
Part #: 111405691B
This is the cap that goes on the outside of the drum; covering up your bearing.
Application:Part #: 111953513C
This switch tells the flasher which way to send the current.
Application:Part #: 2881403CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 211255717
Heater Tube Insulating Cover, Front 2 Pieces
Application:Part #: 021115421B
Oil Pressure Relief Spring
Application:Part #: ECP25B
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 1905451CH
This is a good way to keep your spark plug wires separated.
Application:Part #: 113501615DGR
The rear wheel attaches to the rear brake drum.
Application:Part #: T1881012
This is a tool you will need when putting on seat covers.
Application:Part #: JC44520
Jaycee Shorty Billet IDA Stacks, Blue, Each
Application:Part #: 141971115
The electrical harness runs everything on the car.
Application:Part #: 211703120AX
This is where you would put in the stock jack to jack up the bus.
Application:Part #: 021109601A
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
Application:Part #: 113611810
Master cylinder fitting with gromment
Application:Part #: 113863374D
These rear kick panels go between the rear seat frame and floor.
Application:Part #: 1101346
36 HP Barrel Shims .060 (4)
Application: