Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
If you don't like the hood hold downs, you can use hood pins.
If you don't like the hood hold downs, you can use hood pins. In order to mount these pins you'll have to put a strap of steel across the hood opening, to hold the pins.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 151871182A
These cover the hinges in the back by the rear seat..
Application:Part #: 111863149
Carpet Nails (Pack of 10) Also used for Body to Pan Seal
Application:Part #: 111883401
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 151837626B
Vent wing seals on the front doors keep out the elements.
Application:Part #: 111971019
The electrical harness runs everything on the car. This is just the Main harness that goes front to rear. Does NOT have any of the front wires in it.
Application:Part #: 111251241A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 113611399
Brake Fluid Reservoir Pad
Application:Part #: 113425117
It is for the steering damper. If yours is bad then the steering damper will be sloppy, rendering the damper useless. It will need to be pressed out and pressed in.
Application:Part #: 1129513
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 343853343
Seal between Roof and Molding
Application:Part #: 211945351A
This plastic bulb holder fits on the side in the rear..
Application:Part #: 1127101S
No. 6 Stainless Steel Hose per Ft
Application:Part #: 151871373B
Convertible Top Latch Guide, Pair
Application:Part #: N200223
Rear Apron Plug/ Anti Rattle/ Bus Cargo Floor
Application:Part #: 211105271CCO
200mm Flywheel Core 6v w/O-Ring
Application:
If you don't like the hood hold downs, you can use hood pins.
