Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These systems work well with a single carb set up as they have provisions for the heat riser.
These systems work well with a single carb set up as they have provisions for the heat riser. The collector is the most important part of a header. You want a four into one system for best performance along with a single quite muffler. If you are running heater boxes check out the header flange kit.
Off-Road: All
No customer reviews for the moment.
Part #: 1256091
J-Tubes, replace stock heater boxes, eliminates heater and saves weight, come with gaskets, sold in pairs
Application:Part #: 1251201
When you upgrade to dual carburetors, use these plates to block off the heat risers on your headers or stock exhaust system.
Application:Part #: 1251261C
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 6251004
A stinger (depending on your motor combo) makes horsepower at 5K RPM and above.
Application:Part #: 111251241A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 6251008
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: 6251000
These systems work well with a single carb set up as they have provisions for the heat riser.
Application:Part #: 1251210S
6 Point 8mm-1.25 thread Engine Nuts, Uses 10mm Wrench
Application:Part #: 1251261
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 6251013
Quiet Pack Exhaust Header system w/o Heaters
Application:Part #: 6251005
These systems work well with a single carb set up as they have provisions for the heat riser.
Application:Part #: 1251262
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 6251015CC
Off-Road Competition exhaust systems with stainless steel mufflers.
Application:Part #: 6251012
These systems work well with a single carb set up as they have provisions for the heat riser.
Application:Part #: 113251265
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 6251003IN
A stinger (depending on your motor combo) makes horsepower at 5K RPM and above.
Application:
These systems work well with a single carb set up as they have provisions for the heat riser.
