Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them. If you are not running larger ports, we suggest you stick with stock gaskets. We've had good luck with the copper gaskets as long as your flanges are flat.
Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 111298051GR
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1251010CC
Hide Out Muffler Ceramic Coated
Application:Part #: 1251163
These fit all stock mufflers and come in three different styles..
Application:Part #: 1251004
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1251009
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1251211S
HD Racing Exhaust Nuts, 8mm-1.25 thread, 11mm head (Set of 8)
Application:Part #: 1251010M
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1251005MRG
Dual Quiet Muffler for Merged Header
Application:Part #: 1251202FL
This is the 3-bolt gasket that goes between the muffler and the header.
Application:Part #: 113251263
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1251210S
6 Point 8mm-1.25 thread Engine Nuts, Uses 10mm Wrench
Application:Part #: 1251008H
1 5/8" Merged Flanged Header with Stinger (No Heater Boxes Included)
Application:Part #: 1251159
Black Street Stinger with swivel flange
Application:Part #: 1251000CC
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1251014SS
Stainless Steel Phat Boy Muffler for Merged Exhaust
Application:Part #: 1251167
These fit all stock mufflers and come in three different styles..
Application: