Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Systems are designed for max horsepower and to handle the punishment of off-road competition.
Systems are designed for max horsepower and to handle the punishment of off-road competition. These work well with dual carbs. They don't work well with a single carb set up as they have no provisions for the heat riser.
Off-Road: All
No customer reviews for the moment.
Part #: 1251200
This kit comes with four flanges, two for the heater boxes and two for the header. Sold EACH, 2 required.
Application:Part #: 1256091
J-Tubes, replace stock heater boxes, eliminates heater and saves weight, come with gaskets, sold in pairs
Application:Part #: 1251261C
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 6251010CH
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 111298051GR
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 6251014C
Off-Road Copetition exhaust systems with stainless steel mufflers.
Application:Part #: 111251241A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1251261
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 6251011
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: 6251008
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: 6251006S
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: 6251003IN
A stinger (depending on your motor combo) makes horsepower at 5K RPM and above.
Application:Part #: 6251005
These systems work well with a single carb set up as they have provisions for the heat riser.
Application:Part #: 6251003
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: 1251201CH
Chrome Heat Riser Block-Off Plate Kit
Application: