Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a good, cheap dual carburetor kit for a 1600cc motor.
This is a good, cheap dual carburetor kit for a 1600cc motor. What we don't like is the throttle bushings wear out over time and you need to change the fuel hose it comes with to a German hose. If you need different jet see carburetor parts. They take stock solex idle jets and main jets.
Bug (Type 1): 1500-1600
Bus (Type 2): 1500-1600
Ghia: 1500-1600
Thing: 1500-1600
Off-Road: 1500-1600
No customer reviews for the moment.
Part #: 1129505016
These are some of the most common jets used.
Application:Part #: 113129415B
Here are some of the replacement parts for your stock carburetor. Sold individually.
Application:Part #: 111129493A
Steel Vacuum Line junction between Vacuum Advance and carburetor
Application:Part #: 1129506IDF
Velocity Stack Covers, for IDF & HPMX Carbs, Pair Fits carbs with velocity stacks & no air cleaners
Application:Part #: 112920330
30mm Main Venturi for 40IDF or HPMX
Application:Bug (Type 1); IDF
Bus (Type 2); IDF
Type 3; IDF
KG; IDF
Thing; IDF
Off Road; IDF
Part #: 1129512
Empi Hex Bar Linkage for 48/51 EPC and 48 IDA (works with and without Air Cleaners)
Application:Part #: 113129027EMP
This is what delivers gas and air to the engine.
Application:Part #: 111198569A
This kit comes with the gaskets, the needle and seat, and accelerator pump diaphragm for the carburetor..
Application:Part #: 1129027
This raises a stock 28/30PICT carburetor to clear the 12 volt alternator or generator..
Application:Part #: N137761
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 1129306065A
These are some of the most common jets used.
Application:Part #: 1129324
These are some of the most common jets used.
Application:Part #: 1129504115
These are some of the most common jets used. Sold individually.
Application:Part #: 113129034KIT
This adapter is used when you want to put a 30PICT carb on a dual port manifold. Will only work with a round bowl style carb. It will NOT work with a square bowl carb.
Application:Part #: 112950501IDF
Mixture Screw for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 1129404150
These are some of the most common jets used. Sold individually. .150
Application:
This is a good, cheap dual carburetor kit for a 1600cc motor.